If your vape isn’t working properly, don’t worry! Many common vape issues can be fixed easily. In this guide, we’ll cover the most frequent problems and how to repair them. If you still can’t fix your device, consider contacting Longmada customer support for further assistance.

1. Vape Not Turning On

If your vape doesn’t power on, try these steps:

✅ Check the Battery – Ensure the battery is fully charged. If not, plug it in and allow it to charge.
✅ Unlock the Device – Some vapes require five quick clicks on the power button to turn on/off.
✅ Inspect Battery Contacts – Dirt or debris can prevent the battery from working. Clean the connection points with a cotton swab and rubbing alcohol.
✅ Try a Different Charger – A faulty charger may be the problem. Use a different cable or power source to see if that helps.

2. No Vapor Production

If your vape turns on but doesn’t produce vapor:

✅ Check the Atomizer Connection – Make sure the atomizer (coil) is screwed in securely. If it’s loose, tighten it.
✅ Replace the Coil – A burnt or faulty coil won’t heat properly. Try installing a new one.
✅ Check E-Liquid/Wax Levels – If you’re using a dry coil, it won’t produce vapor. Refill your tank or add wax to your atomizer.
✅ Ensure Proper Airflow – If the airflow holes are blocked, clean them with a dry cloth or a toothpick.

3. Weak or Burnt Taste

If your vape is producing little vapor or tastes burnt:

✅ Adjust Wattage/Voltage – Using too much power can burn the coil. Lower the settings if your vape allows it.
✅ Prime the Coil – If the coil is new, add a few drops of e-liquid to it and let it soak for a few minutes before vaping.
✅ Check for Clogged Airflow – A blocked mouthpiece or air vent can restrict airflow. Clean the airway to restore proper function.
✅ Replace the Coil – If the coil is too old or burnt, replace it with a new one.

4. Leaking E-Liquid or Wax

If your vape is leaking, try the following fixes:

✅ Tighten All Components – Make sure the tank and coil are securely attached to prevent leaks.
✅ Avoid Overfilling – Only fill your tank up to the recommended level. Overfilling can cause leaks.
✅ Check for Cracks or Damage – Inspect your tank for cracks or broken seals. If damaged, replace it.
✅ Store Your Vape Upright – Laying your vape on its side can cause leaks. Always store it upright.

5. Auto-Firing or Button Issues

If your vape fires on its own or the button is stuck:

✅ Turn Off the Device Immediately – Click the power button five times quickly to shut it off.
✅ Clean the Fire Button – Dust or liquid buildup can cause sticking. Use a dry cloth or cotton swab to clean around the button.
✅ Check for Short Circuits – A damaged coil or internal issue could be causing auto-firing. Replace the coil and see if the issue is resolved.

6. Battery Not Charging

If your vape isn’t charging:

✅ Try a Different Charger – Use a new USB cable or power adapter.
✅ Inspect the Charging Port – Look for dirt or debris in the port and clean it carefully.
✅ Replace the Battery – If the battery is old or damaged, it may need to be replaced.

Still Having Issues? Contact Longmada Support!

If your vape is still not working after following these troubleshooting steps, don’t worry! Contact Longmada customer support, and we’ll help you find a solution.